@Philips_Support_P
It would be great if you could update this very useful list in a read only post, where you could add new bugs and tick smashed ones ?
Hey Guys
Just got back from work and turned on the projector after 10 days … something weird, the projector did not autofocus. I had to update the software and then connect the remote and click the focus button ( i did it after turning off AUTOFOCUS SETTINGS) . i am not sure how the autofocus works actually. horizontal keystone seems to work fine. anything else i need to check guys?
Hate to bring this auto-focus issue up again. My latest report: My ppm auto-focus is very inconsistent. I am not talking about the ‘sweet spot’ here. My ppm always spot on.
Inconsistent because the auto-focus some times work and sometimes failed to activate at all. When I move the projector to another location, I see the auto-focus graphics came up. Means ppm detect it needs to refocus. . when it work, you can hear the mechanical sound of the focusing… When it don’t work, no mechanical sound. The auto-focus graphics just came up with no physical mechanic movement.
I gently shake ppm and there was no loose sound. Anyone has same issue?
When it work, it work all the way. No matter how many times I press the button, the thing just work. But when it stopped working, AF graphics always appear but it won’t work repeatedly. No matter how many times I press AF.
Oh… And even the AF graphics came up and when it’s not working, the graphics will not turn as well… No auto turning animation… Just appear and later disappear… Manual focus… Graphics animation will turn but no mechanical movement.
This defect is affecting my calm… A lot… It’s frustrating…
Just Updated to FW 1.1.0 Still I am having the autofocus Freeze issue.
After Turning on the projector, for fine tuning the focus, i click the focus ring in the remote. The ring appears and the screen turns hazy and auto focusing freezes . Then as usual the ring disappears in 4/5 seconds then i again when i press the button and it focuses back(it sometime needs manual fine tuning too)
It happens everytime i turn on the projector or the first time i move the projector after turning it on.
I don’t quite understand why it does this on first boot only. What happens if you try to focus twice, and second time succeeds, if you then turn it off, back on straightaway, and then try to focus?