General info about shipment and manufacturing

[Andy]

Good to hear that not even you have yours updated. So again, the non-EU European countries have to wait a bit longer.
Hopp Schwiiz.

[musashimaro]

GASP !!
it’s updated.

[Simon_Painter]

Have not had a text. I have a script which periodically checks for changes on the page and let’s me know. Saves me hitting f5 every hour

[Tom_Schmidt]

I am honestly utterly confused by that thread. Basically the only thing I need is a decent estimate how long it’s gonna take.
Indiegogo contributuion # is 18265 and the backer_id is 15739035.
Maybe some kind soul out there could help me out…

[Pabl0]

Same.

[Scottie]

Hi @Philips_Support_N,

Hope you’re doing well, just wanted to double check with you regarding list 3, the 10th May and not 1st May booked for flights as was in previous update messages from earlier in the week?

Kindest Regards
Niall

[Philips_Support_N]

yes our forwarder told us they booked it for the 10th

[imdevu]

Hard to estimate, as we have not reached a stable output phase yet. Follow this thread and you can try:

High Level Summary Thread

April 26 (8 weeks): 3018 - Shipped by Jan 2020 (before Shutdown) 1480 - Shipped second week of Mar 2020 1570 - Ready End March (1170 backers + 400 pre-orders) - Shipped April 12 1200 - Ready April Week 1 - Shipped April 12 0 - Ready April Week 2 - Holiday in China 0 - Ready April Week 3 - 784 Pc rejected due to QC Failed 1612 - Ready April Week 4 - Packing and shipping pending 5162 pieces were manufactured post reopening. Current average output is now around 645 pieces per week. EU tra…

[harpysta]

Well this is good news Brunei is no longer on the no fly list! Hopefully I can be on a delivery list soon

[Donniemcm]

Hi @Philips_Support_N,

My order is for Hong Kong. So you mean that it’s going to take the plane on 11th May only?

If yes, wouldn’t it be a better alternative via land?
Not sure about all the constraints, if any, would appreciate you to share some of possible!

Thanks
Backer ID 15588450

[Philips_Support_N]

For HK it will come directly from SZ

[Scottie]

Thanks for clarify this.

Enjoy the rest of you’re day

[Philips_Support_N]

you too!

[wernerj]

@Addo

Most of it could be from flying non-direct

I would certainly hope so, much more likely than some mid-air refueling operation

My tracking updated around 17:00 as well!

[fawkeswei]

It’s not a gift, it’s for myself which is living in Europe now.

[Donniemcm]

@Philips_Support_N,

Thanks for confirming! May I know when that would be dispatched to HK?

[Akhmad_Sabah]

Finally there is a process and the project is in the way to Denmark.

[Tom_Schmidt]

Ah, ok… so do I understand this right? About 8000 pieces were shipped so far. So that leaves about 10000 in front of ours. At the current output and assuming a few people ordered more than one, this makes it likely that it will be produced in about 20 weeks from now, so it probably will get here in half a year? Nothing my boss will love too much I guess…
Or do I have any major flaw in my thinking?

[Paul_Lockett]

@Philips_Support_N can you provide any insight on the below questions?

@Paul_Lockett

@Philips_Support_N since it is evening in China and they are on holidays tomorrow till the 5th can we get an update on the following.

1. How many products were completed this week?
2. When is quality control and when can we expect the new list to be posted if no QC issues?
3. Did you receive the additional light engines and have they been coming in at 300 a day as planed or is the supplier causing issues?
4. What is the current count of available light engines?
5. Have you made any progress with countries with increased cost for shipping, when can we expect orders to resume for these areas or have they already?
6. Have you started to ship back to Canada? (This one was more personal)

Thanks in advance and can’t wait to see what is in the new software update.

[sbrj]

Yay! Got it!
… I mean the status change You should’ve seen my face when it happened

Just we need to be patient a little bit more … just a little bit more …