Hi, the FW didn’t update D+, as soon as the FW installed, I clicked D+ and it then forced me to update, I couldn’t use the app without updating, but then after the update it wouldn’t launch. I’ll clear the cache and reinstall, thanks for the advice! Cheers.
@Sponnie we don’t force to update apps especially if the app is not preloaded. I think this is due to Disney+ new policy.
1 Like
Thanks - probably just a coincidence, I had’nt used the app for a while and then updated the FW.
I’ll try the clear cache and redownload method. Not many have seemingly had issues, so must be a fairly isolated issue.
Thanks for the reply.
@Philips_Support_P, i updated the ui with the beta you provided. The miracast icon doesn’t launch anything and doesn’t even click. Can you give me the apk to the old ui?
You can go back to the Screeneo Launcher v1.5.6 by uninstalling the v1.5.9 update.
You can do this in the hidden menu and it goes like this:
Go to More settings 
, press OK
Scroll down and select About, press OK
Scroll down and select Software Version, press 5 times OK
You’re now in the hidden menu
Scroll down and select Apps, press OK
Scroll down and select See all apps, press OK
Scroll down and select Screeneo Launcher, press OK
Select Uninstall updates, press OK
Now you’re back to Screeneo Launcher v1.5.6
2 Likes
Thats fixed it, cheers fella.
Updated the software yesterday. Now my projector starts to boot, shows the picopix max start up then the screen goes dim and never goes to the homescreen. Then I have to manually power off. Is there a reset I can do or is my projector an expensive nightlight now?
Please request the firmware restore procedure via an email to support@ philipsprojection.com with the subject line
PPX620 Firmware Restore Procedure Request
After this update I can’t anymore see the projector from my PC, I was using Chrome Brower and I was able to cast from there…
Now Chrome can’t anymore find devices to cast to.
From the projector I tried different combination of enabling/disabling ChromeCast and AirPlay, but nothing changed, and my projector is still not seen.
My network card doesn’t support Miracast, so Chromecast is my only option.
I posted even here but maybe it’s more related to the update.
You can try to start the AirPlay app from the home screen, then enable Google Cast.
There is also a “device discovery tweaks” option at the bottom of the settings in this app, which may help.
Check also if your WiFi network had any config changes.
1 Like
Thanks, seems like it started working after I disabled discovery tweaks
1 Like
In the end I found out it wasn’t changing discovery tweaks who made the Google Cast working, but was an issue with the access point, so not of the firmware projector.
Sometimes the access point seems unable to let connected devices see each others, and when this happens I just have to reconnect them to the network.
4 posts were merged into an existing topic: Slightly doubled image
@Philips_Support_P we need to resolve this . Thanks!
Hi!
One question: Is it possible that this update changed something with access to the hardware-decoder for Aps? I remember in the very first version VLC had no access to it and was unusable. I have a Router which provides the TV signal in my Wlan (SD in MPEG2 and HD in h264) - now the image is not stable when i stream it via KODI or the Fritz Android App ( FRITZ!Apps ohne Google Play Store herunterladen | FRITZ!App WLAN | AVM Deutschland ) - I think it was stable before. Thank you!
1 Like
Hi @PhilippBerlin I think something in FritzBox itself has changed because I have the same issue streaming DVBC even on my Fire TV, iPad etc. using either VLC or FritzBox app.
Nothing on the PicoPix Max was changed related to the video decoding, however you can try to turn Automatic Keystone Correction on (and 4-corner correction OFF), in case that is the issue.
Hi @Philips_Support_P - could be the 4-corner correction then! I turned it on lately, will try again without it.
I have the old FRITZ!WLAN Repeater DVB-C which does not get any updates anymore (FritzOS 7.01 from 2018) - I have no issues with other devices.
That is correct! There was an FritzBox OS update recently.